Follow Ups

Post Followup

AK Site. AK-74 Discussion.

Bulgarian sight on a romanian barrel
Author: kvanwolf	©	November 14, 1999 at 09:05:20

	Ok i know i have seen this before but I didnt have a romanian AK74 at the time so i didnt pay to much attention.. I have a Romanian AK74 and was curious if I can replace the front sight with a bulgarian sight and brake Thanks... Kevin
Follow Ups
	Re: Bulgarian sight on a romanian barrel Tantal 09:10:14 11/15/1999 (4) I have been told that the neck of a .50 BMG case works well as a shim. Beryl 07:18:24 11/17/1999 (2) Re: I have been told that the neck of a .50 BMG case works well as a shim. kvanwolf 02:07:31 11/18/1999 (1) Re: Kvanwolf, Please measure the thickness of the case neck. The diameter of the entire case mouth where the bullet is seated is approx. 12.7 mm. I think the Romanian barrel O.D. is 13.5. The case neck can be split, but the critical dimension would be case neck thickness, as you need approx. 3/4ths of a mm. for a snug shim. Please let us know what you find out. Ntxt. Malysh 00:56:04 11/20/1999 (0) Thanks Tantal kvanwolf 01:54:23 11/16/1999 (0)
Post Followup
	Name:    Password:    E-Mail:    E-Mail Notification: emails sent to you whenever someone replies. Subject:    > Ok i know i have seen this before but I didnt have a > romanian AK74 at the time so i didnt pay to much > attention.. I have a Romanian AK74 and was curious if I can > replace the front sight with a bulgarian sight and brake > Thanks... Kevin Optional link URL:    Link title:    Optional image URL:
Served by ruboard 1.2.1; Copyright © 1998 by Andrew Maltsev.